top of page

PUBLICATIONS

​ SCI/SCIE Journal Papers                                                                                                             

인용 통계          전체       2019년 이후
인용횟수         2346              592
 h-index              22                 13
 i10-index            32                 19

J32. Yumi Uruno, Juwon Lee, Hanseob Jeong, Jaewon Chung, Numerical study on particle behavior in a Y-junction mixer for supercritical water hydrolysis Bioresource Technology, Volume 393, February 2024, 130072, https://doi.org/10.1016/j.biortech.2023.130072

J31. Yumi Uruno, Jaewon Chung, Hyojun Kim, Kihyun Lee, Three-dimensional simulation of droplet breakup and evaporation in attemperator, International Journal of Heat and Mass Transfer, Volume 196, 1 November 2022,  123300,  https://doi.org/10.1016/j.ijheatmasstransfer.2022.123300

J30. Sovann Khan, Yunseok Choi,Hak-Young Ahn, Jae Hyun Han, Byeong-Kwon Ju, Jaewon Chung, and So-Hye Cho, Control of Particle Size in Flame Spray Pyrolysis of Tb–doped Y2O3 for Bio-Imaging, Materials 2020, 13(13), 2987, https://doi.org/10.3390/ma13132987

J29. Yunseok Choi, Daein Lee, Sungje Hong, Sovann Khan, Burak Darya, Jae-Young Lee, Jaewon Chung and So-Hye Cho, Investigation of the Synergistic Effect of Sonolysis and Photocatalysis of Titanium Dioxide for Organic Dye Degradation, Catalysts 2020, 10(5), 500; https://doi.org/10.3390/catal10050500

J28. Hyunsuh Kim, Hyunhun Choi, Daegil Kim, Jaewon Chung*, Hyojun Kim, Kihyun Lee, Experimental study on splash phenomena of liquid jet impinging on a vertical wall, Experimental Thermal and Fluid Science, Volume 116, March 2020

J27. Yumi Uruno, Geunwon Choi, Minjun Sung, Jaewon Chung, Hyojun Kim, Kihyun Lee, Transient analysis of attemperator enthalpy balance based on the commissioning data of a coal-fired steam power plant, Applied Thermal Engineering, Volume 150, 5 March 2019, Pages 1141-1158
J26. Jungkeun Yang, Baekhyun Cho and Jaewon Chung*, Optimization of pulsed voltage waveform for electrohydrodynamic jetting on-demand, Journal of Mechanical Science and Technology, August 2018, Volume 32, Issue 8, pp 3775–3786
J25. Baekhyun Cho, Geunwon Choi, Yumi Uruno, Hyunseo Kim, Jaewon Chung, Hyojun Kim, and Kihyun Lee, One-dimensional simulation for attemperator based on commissioning data of coal-fired steam power plant, Applied Thermal Engineering, Volume 113, 25 February 2017, Pages 508-518
J24. Jae Seong Lee, Juhyeong Seo, Ho Young Kim*, Jaewon Chung, Sam S. Yoon, “Effects of geometry and operating conditions on hydrogen productivity of a fuel cell reformer,” International Journal of Heat and Mass Transfer, Vol. 73, June 2014, pp. 318–329

J23. Jungkeun Yang, Ho Kim, Baekhyun Cho, Jaewon Chung*, "Modeling of sessile droplet oscillation on electrohydrodynamic jetting nozzle at constant back pressure," Journal of Mechanical Science and Technology, July 2014, Volume 28, Issue 7, pp 2815-2823.

J22. Ho Kim, Jungkeun Yang and Jaewon Chung*, “Resonant oscillation phenomena of a sessile droplet on electrohydrodynamic jetting nozzle,” Japanese Journal of Applied Physics Vol. 53,  No. 5S3, Published 28 April 2014

J21. Jaewon Chung, Sewoon Han, Daeho Lee, Sanghoon Ahn, Costas P. Grigoropoulos, Jooho Moon, Seung H. Ko, “Nanosecond laser ablation of silver nanoparticle film,” Optical Engineering 52(2), 024302, Feb. 2013.

J.20 Seungmi Lee, Junyoung Song, Ho Kim and Jaewon Chung, “Time resolved imaging of electrohydrodynamic jetting on demand induced by square pulse voltage,” Volume 52, pp. 89-97, Oct. 2012.

J19. Taewoong Lim, Jungkeun Yang, Seungmi Lee, Jaewon Chung# and Daehie Hong, “Deposit Pattern of Inkjet Printed Pico-liter Droplet,” International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 6, pp. 827-833, June 2012.

J18. Seung Hwan Ko, Jaewon Chung, Nico Hotz, Koo Hyun Nam and Costas P Grigoropoulos, “Metal nanoparticle direct inkjet printing for low-temperature 3D micro metal structure fabrication,” Journal of Micromechanics and Microengineering, Volume 20, Number 12, 125010, Dec, 2010

Selected for inclusion in IOP Select, http://Select.iop.org. IoP Select is a special collection of journal articles, chosen by our Editors based on one or more of the following criteria: *Substantial advances or significant breakthroughs *A high degree of novelty *Significant impact on future research

J17. Hyojun Kim, Junyoung Song, Jaewon Chung*, Daehie Hong, “Onset condition of pulsating cone-jet mode of electrohydrodynamic jetting for plane, hole, and pin type electrodes,” Journal of Applied Physics, 108(10), 102804 (2010); doi:10.1063/1.3511685 (10 pages), Nov. 2010

J16. Daehie Hong, Jaeik Chung, Jaewon Chung*, Insung Hwang, Jongheun Lee, Seunghwan Ko, Costas P. Grigoropoulos, “Assembly of Acircular SnO2 Rod using Optical Tweezers and Laser Curing of Metal Nanoparticles,” Japanese Journal of Applied Physics, Volume 49, Issue 5, pp. 05EA12-05EA12-3 (2010).

J15. Chan Hyuk Nam, Dongjin Lee, Daehie Hong* and Jaewon Chung, ”Manipulation of Nano Devices with Optical Tweezers,” International Journal of Precision Engineering and Manufacturing, Vol. 10, No. 5, pp. 45-51 DECEMBER 2009

J14. Taewoong Lim, Jaeik Jeong, Jaewon Chung* and Jin Taek Chung, “Evaporation of Inkjet Printed Pico-liter Droplet on Heated Substrates with Different Thermal Conductivity,” Journal of Mechanical Science and Technology 23 (2009) 1788~1794

J13. T. Lim, S. Han, J. Chung*, J. Chung, S. H. Ko, C. P. Grigoropoulos, “Experimental Study on Spreading and Evaporation of Inkjet Printed Pico-liter Droplet on a Heated Substrate,” International Journal of Heat and Mass Transfer, Volume 52, Issues 1-2, 15th  January 2009, Pages 431-441,

J12. Ko, S.H., Pan, H., Hwang, D.J., Chung, J., Ryu, S., Grigoropoulos, C.P., Poulikakos, D., “High resolution selective multilayer laser processing by nanosecond laser ablation of metal nanoparticle films,” Journal of Applied Physics, Volume 102, Issue 9, 2007, Article number 093102

J11. S. H. Ko, J. Chung, H. Pan, C. P. Grigoropoulos*, D. Poulikakos, 2007, “Fabrication of Multilayer Passive and Active Electric Components on Polymer using Inkjet Printing and Low Temperature Laser Processing,” Sensors and Actuators A: Physical, Volume 134, Issue 1, 28 February 2007, Pages 161-168

J10. S. H. Ko, Y. Choi, D. J. Hwang, C. P. Grigoropoulos*, J. Chung*, D. Poulikakos, 2006, “Nanosecond laser ablation of gold nanoparticle films,” Applied Physics Letters, Volume 89, Issue 14, 2006, Article number 141126

J9. J. Chung, S. Ko, C. P. Grigoropoulos*, N. R. Bieri, C. Dockendorf, D. Poulikakos, 2005, “Damage-free Low Temperature Pulsed Laser Printing of Gold Nanoinks On Polymers,” ASME Journal of Heat Transfer, Vol. 127, No. 7, pp. 724-732. (IF 0.731)

J8. Y. Shin, J. Chung, N. Kladias, E. Panides, J. Domoto, C.P. Grigoropoulos*, 2005, “Compressible flow of liquid in standing wave tube,” Journal of Fluid Mechanics, Vol. 536, pp. 321-345. (IF 1.853)

J7. N.R. Bieri, J. Chung, D. Poulikakos*, C.P. Grigoropoulos, 2005, “An experimental investigation of microresistor laser printing with gold nanoparticle-laden inks,” Applied Physics A, Vol. 80, No. 7, pp. 1485 – 1495 (IF 1.452)

J6. J. Chung, N. R. Bieri, S. Ko, C. P. Grigoropoulos*, D. Poulikakos, 2004, “In tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation,” Applied Physics A – Materials Science & Processing, Special issue on “Laser Ablation,” Publisher: Springer-Verlag GmbH, Vol. 79, No. 4-6, pp. 1259-1261. (IF 1.452)

J5. J. Chung, S. Ko, N. R. Bieri, C. P. Grigoropoulos*, D. Poulikakos, 2004, “Conductor microstructures by laser curing of printed gold nanoparticle ink,” Applied Physics Letters, vol. 84, no. 5, pp. 801-803, February 2, 2004. (IF 4.308)

J4. N. R. Bieri, J. Chung, D. Poulikakos*, C. P. Grigoropoulos, 2004, “Manufacturing of nanoscale thickness gold lines by laser curing of a discretely deposited nanoparticle suspension,” Superlattices and Microstructures, Vol. 35, Issues 3-6 , March-June 2004, pp. 437-444, Eurotherm 75 ‘Microscale Heat Transfer 2′ (IF 0.431)

J3. J. Chung, C.P. Grigoropoulos*, R. Greif, 2003, “Infrared thermal velocimetry in MEMS-based fluidic devices,” Journal of Microelectromechanical Systems, vol.12, no.3, pp.365-372. (IF 2.880)

J2. J. Chung, C.P. Grigoropoulos*, R. Greif, 2003, “Infrared thermal velocimetry for nonintrusive flow measurement in silicon microfluidic devices,” Review of Scientific Instruments, vol.74, no.5, pp.2911-2917. (IF 1.226)

J1. N. R. Bieri, J. Chung, S. E. Haferl, D. Poulikakos*, C. P. Grigoropoulos, 2003, “Microstructuring by printing and laser curing of nanoparticle solutions,” Applied Physics Letters, vol.82, no.20, pp.3529-3531. * Also selected for May 26, 2003, Vol. 7, Issue 21 of the Virtual Journal of Nanoscale Science and Technology.  (IF 4.308)

citation.png

​ International Conference                                                                                                             

C35 Yumi Uruno, Im Tae Jeong, Jaewon Chung, “Analysis of droplet evaporation by simulation of three-dimensional attemperator system,” 2019 ILASS-Asia 2019 20th, Dec. 21-23, 2019, Ube, Japan, Best Presentation Award

C34 Minjun Sung, Geunwon Choi, Jaewon Chung, Hyojun Kim, Kihyun Lee “Transient analysis of enthalpy balance for attemperator based on commissioning data of coal-fired steam power plant,” 2017 ACTS, Mar. 26-30, 2017, Jeju, Korea

C33 Yumi Uruno, Jaewon Chung, Hyojun Kim, Kihyun Lee “Simulation for attemperator in steampower plant,” 2017 ACTS, Mar. 26-30, 2017, Jeju, Korea

C32 Jaewon Chung “Electro-hydrodynamic oscillation and jetting on demand,” 2015 MCARE Materials Challenges in Alternative & Renewable Energy, Feb. 24-27, 2015, LOTTE Hotel, Jeju, Korea, Invited Talk

C31 Ho Kim, Jungkeun Yang, and Jaewon Chung*, “Electro-hydrodynamic jetting on demand,” ICFPE 2013, Jeju, Korea, Sep. 10-13, 2013, Invited Talk

C30 Ho Kim, Jungkeun Yang and Jaewon Chung, “Drop on demand electro-hydrodynamic printing induced by square pulse voltage signal and jetting at the resonant frequency using sinusoidal voltage signal,” ICFPE 2013, Jeju, Korea, Sep. 10-13, 2013, 포스터세션

C29 Ho Kim, Jungkeun Yang and Jaewon Chung, “Resonant electrohydrodynamic jetting using sinusoidal voltage signal,” ICFPE 2013, Jeju, Korea, Sep. 10-13, 2013, 포스터세션

C28 Jungkeun Yang, Ho Kim, Seungmi Lee and Jaewon Chung, “Electrohydrodynamic jetting on demand using square pulse voltage,” ICFPE 2013, Jeju, Korea, Sep. 10-13, 2013, 포스터세션

C27 Jaeik Jeong, Jungkeun Yang, Jaewon Chung, “Electric Field Assisted Laser Induced Forward Transfer of Vapor,” ICFPE 2013, Jeju, Korea, Sep. 10-13, 2013, 포스터세션

C26 Ho Kim, Jaewon Chung, “Drop on demand electrohydrodynamic jetting using various pulsed voltage signal,” Proceedings of the International Conference of Manufacturing Technology Engineers 2012, Seoul, Korea, Oct. 18-19, 2012, 포스터세션

C25 Seungmi Lee, Jaewon Chung, “Resolution enhancement of EHD printing using hole-type electrode,” 8248-18, SPIE 2012 Photonics West, San Francisco, California, USA, Jan. 21-26, 2012

C24. Jun-Young Song, Hyo-Jun Kim and Jaewon Chung, “Onset Voltage Conditions for Electrohydrodynamic Printing,” International Conference on Flexible and Printed Electronics, Jeju Island, Korea, Nov. 12-13, 2009.

C23. Chanhyuk Nam, Daehie Hong*, Jaeik Jeong, Sewon Han, Jaewon Chung, Insung Hwang, Jongheun Lee, Seunghwan Ko, Costas P. Grigoropoulos, “Assembly of SnO2 Rod using Optical Tweezers and Laser Curing of Metal Nanoparticles,” International Conference on Flexible and Printed Electronics, Jeju Island, Korea, Nov. 12-13, 2009.

C22. Hyojun Kim, Jaeik Chung, Junyoung Song, Jaewon Chung*, “An experimental study of onset condition for electrohydrodynamic jetting,” Proceedings of InterPACK2009, July 19-23, 2009, San Francisco, California, USA

C21. Taewoong Lim, Jaeik Jeong, Jaewon Chung*, Jin Taek Chung, “Evaporation of inkjet printed pico-liter droplet on heated substrates with different thermal conductivity,” The 7th JSME-KSME Thermal and Fluids Engineering Conference, October 13-16, 2008, Sapporo, Japan

C20 Sewoon Han, Taewoong Lim, Jaewon Chung,* Seunghwan Ko, Costas P. Grigoropoulos, “Sintering Characteristics of Surface Monolayer Protected Metal Nanoparticles,” International Conference on Multifunctional Materials and Structures, July 28-31, 2008, Hong Kong, China

C19. Sewoon Han, Inchul Seo, Jaewon Chung, “Sintering Characteristics of Alkanethiol Capped Gold Nanoparticles,” 5th International Symposium Nano Korea 2007, August 29-31, Goyang, Korea

C18. Taewoong Lim, Jaewon Chung, “Deposit pattern by evaporation of pico-liter droplet,” 18th International Symposium on Transport Phenomena, 27-30 August, 2007, Daejeon, Korea

C17. Han, Sewoon; Lim, Taewong; Chung, Jaewon; Ko, Seung H.; Grigoropoulos, Costas P.; Kim, Dongjo; Moon, Jooho, “Patterning microconductor using nanosecond laser ablation of metal nanoparticle film,” Proceedings of SPIE – The International Society for Optical Engineering, v 6458, Photon Processing in Microelectronics and Photonics VI, 2007, p 645811, San Jose, CA, USA, Jan. 20-25, 2007.

C16. C.P. Grigoropoulos*, S. H. Ko, H. Pan, J. Chung, D. Poulikakos, “Laser-assisted maskless fabrication of flexible electronics,” Proceedings of SPIE – The International Society for Optical Engineering, v 6459, Laser-based Micro- and Nanopackaging and Assembly, 13 March 2007, p 64590V

C15. Ko, Seung Hwan; Chung, Jaewon; Pan, Heng; Grigoropoulos, Costas P.; Poulikakos, Dimos, “Fabrication of multilayer passive electric components using inkjet printing and low temperature laser processing on polymer,” Proceedings of SPIE – The International Society for Optical Engineering, v 6106, Photon Processing in Microelectronics and Photonics V, 2006, p 61060E, Jan 23-26 2006, San Jose, CA, United States.

C14. S.H. Ko, J. Chung, Y. Choi, D. J. Hwang, C. P. Grigoropoulos, D. Poulikakos, “Subtractive laser processing of low temperature inkjet printed micro electric components of functional nano-ink for flexible electronics,” Proceedings of the ASME/Pacific Rim Technical Conference and Exhibition on Integration and Packaging of MEMS, NEMS, and Electronic Systems: Advances in Electronic Packaging 2005, Vol. PART C, 2006, p 1935-1941, July 17-22, 2005, San Francisco, USA.

C13. S Ko, J. Chung, Y. Choi, C. Griogoropoulos, D. Poulikakos, “Fabrication of Inkjet Printed Flexible Electronics by Low Temperature Subtractive Laser Processing,” Proc. of 2005 ASME International Mechanical Engineering Congress and R&D Expo, Orlando, FL, USA, Nov. 5-11, 2005, American Society of Mechanical Engineers, Electronic and Photonic Packaging, EPP, Vol. 5, Integration and Packaging of Micro/Nano/Electronic Systems, 2005, p 599-603.

C12. S. Ko, J. Chung, Y. Choi, C. P. Grigoropoulos, N. R. Bieric, T. Choi, C. Dockendorf, D. Poulikakos, “Laser based hybrid inkjet printing of nanoink for flexible electronics,” Proceedings of SPIE –Photon Processing in Microelectronics and Photonics IV, Vol. 5713,  2005, p 97-104, SPIE Photonics West, San Jose, USA, Jan. 22-27, 2005.

C11. C. P. Grigoropoulos, L. Xu, J. Chung “Heat Transfer and Phase Transformations in Pulsed Laser Melting and Crystallization of Thin Silicon Films”, International Conference on Polycrystalline Semiconductors 2004, University of Potsdam, Germany, Sept. 5-10, 2004.

C10. L. Xu, J. Chung, C.P. Grigoropoulos, “Double Laser Crystallization (DLC) of pre-patterned amorphous silicon film and amorphous silicon film with a patterned assisting SIO2 layer,” Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, Vol. 4, pp. 627-630, Charlotte, NC, United States.

C9. J. Chung, S. H. Ko, C. P. Grigoropoulos, N. R. Bieri, C. Dockendorf, D. Poulikakos “Microconductors on polymer by printing nanoparticle ink and pulsed laser curing,” Proceedings of 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, Vol. 4, pp. 597-605, Charlotte, North Carolina, July 11-15, 2004

C8. J. Chung, S. H. Ko, N.R. Bieri, C. P. Grigoropoulos, D. Poulikakos “Laser curing of gold nanoparticle inks,” Proc. of 2003 ASME International Mechanical Engineering Congress and R&D Expo, Washington D.C., Nov. 16-21, 2003. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, vol.  374, no. 3, 2003, p 131-140

C7. J. Chung, C. Harvey, M. Havstad, J. Morse, H.G. Park, D. Sopchak, R. Upadhye, “A microfluidic hydrogen generator for fuel cell applications,”  Proc. of 2003 American Institute of Chemical Engineers, San Francisco, Nov. 16-21, 2003.

C6. J. Chung, N. R. Bieri, S. Ko, C. P. Grigoropoulos, D. Poulikakos, “In tandem deposition and sintering of printed gold nanoparticle inks induced by continuous Gaussian laser irradiation,” The 7th International Conference on Laser Ablation, October 5-10, 2003, Hersonissos, Crete, Greece, manuscript printed in Applied Physics A, Special issue on “Laser Ablation,” Vol. 79, No. 4-6, pp. 1259-1261.

C5. H.G. Park, J. Chung, C.P. Grigoropoulos, R. Greif, M. Havstad, J.D. Morse, “Transport in a microfluidic catalytic reactor,” Proc. of ASME Summer Heat Transfer Conference, HT2003-47216, Vol. 1, pp. 47-56, Las Vegas, Nevada, July 21-23, 2003.

C4. H.G. Park, J. Chung, J.D. Morse, M. Havstad, R. Greif, C.P. Grigoropoulos, W. Benett, D. Sopchak, R. Upadhye, “A methanol steam reforming microreactor for Proton Exchange Membrane micro fuel cell system”, Hydrogen and Fuel Cell 2003 Conference and Trade Show, Vancouver, Canada, June 8-11, 2003.

C3. J. Morse, T. Graff, D. Sopchak, H.G. Park, J. Chung, “Micro-fabricated methanol/water reformers for small PEM fuel cells”, Fuel Cells From Materials to Systems, Electrochemical Society for their Paris meeting, April 27- May 3, 2003.

C2. J. Chung, Y. Shin, K. Petigrew, P. Chapman, C. P. Grigoropoulos, R. Greif, “Infrared Thermal Velocimetry,” Proc. of 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, Nov. 11-16, 2001. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, Vol. 369, No. 7, 2001, pp 329-333.

C1. J. Chung, C. P. Grigoropoulos, R. Greif, “Capillary Pumped Loop Heat Spreader For Electronics Cooling,” Proc. of 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, Nov. 11-16, 2001. American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, Vol. 369, No. 7, 2001, p 283-290.

 Domestic Conf. & Journal                                                                                                            

DS32 최현훈, 우루노유미, 김상호, 정재원 “분사제트 온도변화에 따른 벽면충돌 현상에 대한 실험적 연구” 2018년도 대한기계학회 추계학술대회, 12월 12~15일, 정선, 하이원리조트, 포스터발표

DS31 김상호, 우루노유미, 정재원 “VOF모델을 활용한 스플래시 현상에 대한 CFD연구” 2018년도 대한기계학회 추계학술대회, 12월 12~15일, 정선, 하이원리조트, 포스터발표

DS30 우루노유미, 정재원 “화력발전소에서의 과열저감기 실측데이터 분석 및 시뮬레이션 해석” 2017년도 대한기계학회 열공학부문 춘계, 2017년 5월 24~26일, 부산, BEXCO, 구두발표, 

DS29 양중근, 정재원 “요구적출형 전기수력학 분사를 위한 전압 파형 최적화” 제7회  유연•인쇄전자 심포지움, 2016년 9월 22~23일, 대전, 한국기계연구원, 포스터발표

DS28 김현서, 조백현, 최근원, 우루노유미, 정재원 “발전플랜트용 과열저감기의 물리적 해석 및 시뮬레이션” 대한기계학회 2016 춘계학술대회 열공학부문, 4월 19~22일, 여수, 디오션리조트 호텔 및 콘도 여수, 구두발표

DS27 우루노유미, 조백현, 최근원, 김현서, 정재원 “발전소용 과열저감기 스프레이 분열 및 증발해속” 대한기계학회 2015 추계학술대회, 11월 10~14일, 제주, ICC제주, 포스터세션

DS26 조백현, 양중근, 정재원 "최적화된 전압 파형을 이용한 전기수력학 (EHD)분사" 한국정밀공학회 2015 춘계학술대회, 2015년 5월 13~15일, 제주, 라마다호텔, 포스터세션

DS25 최근원, 양중근, 정재원 "은 나노와이어의 열 소결과 가압 소결" 한국정밀공학회 2015 춘계학술대회, 2015년 5월 13~15일, 제주, 라마다호텔, 포스터세션

DS24 양중근, 정재원, 조백현 "요구적출형 전기수력학 분사" 학국정밀공학회 2015 춘계학술대회, 2015년 5월 13~15일, 제주, 라마다호텔, 구두발표

DS23 조백현, 우루노유미, 최근원, 김현서, 정재원 "발전소용 과열저감기 물리적 해석 "2015년 플랜트 춘계, 2015년 5월 21~22일, 부산 BEXCO.

DS22 우루노유미, 조백현, 최근원, 김현서, 정재원 "증기 동력 사이클에서의 과열저감기 시뮬레이션 분석" 2015년 열공학 춘계, 2015년 4월 23~24일, 부산 파라다이스 호텔, 포스터 세션

DS21 최근원, 조백현, 김현서, 정재원 "과열저감기에서의 액적 증발 열전달 해석" 2015년 열공학 춘계, 2015년 4월 23~24일, 부산 파라다이스 호텔, 포스터 세션

DS20 조백현, 최근원, 김현서, 정재원 "과열저감기 스프레이 노즐을 통한 물의 미립화 및 액적거동 해석", 2015년 열공학 춘계, 2015년 4월 23~24일, 부산 파라다이스 호텔, 포스터 세션

DS19 양중근, 조백현, 정재원 “전기수력학 분사에서의 액적 모델링 및 인가 전압 파형 최적화,” 2015년 제4회 나노 임프린트·몰딩·프린트 학술대회, 2015년 2월 11일, 고려대학교 하나스퀘어, 서울, 포스터 세션

DS18 양중근, 조백현, 정재원 “Electro-hydrodynamic jetting on demand,” 2015년 제4회 나노 임프린트·몰딩·프린트 학술대회, 2015년 2월 11일, 고려대학교 하나스퀘어, 서울, 초청강연

DS17 양중근, 조백현, 정재익, 정재원 “전기수력학 분사에서의 액적 진동 모델링,” 2014년 대한기계학회 열공학부문 춘계학술대회, 2014년 4월 24일, 제주대학교 국제교류회관, 제주, 구두발표

DS16 양중근, 김호, 정재원 “전기수력학 분사를 위한 전기 신호 최적화,” 2013년 대한기계학회 추계학술대회, 2013년 12월 18~20일, 강원랜드 컨벤션센터, 정선, 포스터 세션

DS15 정재익, 정재원 “전기장 및 레이저 복합 유도 순방향 전사 프린팅 기술,” 2013년 대한기계학회 열공학부문 춘계학술대회, 2013년 5월 24일, BEXCO, 부산, 포스터세션

DS14 김호, 양중근, 정재원 “사인파를 이용한 고유 주파수에서의 전기수력학(EHD) 분사,” 2013년 대한기계학회 마이크로/나노공학 부문 춘계학술대회, 2013년 5월 24일, BEXCO, 부산, 포스터세션

DS13양중근, 김호, 정재원 “사각파를 이용한 전기수력학분사,” 2013년 대한기계학회 마이크로/나노공학 부문 춘계학술대회, 2013년 5월 24일, BEXCO, 부산, 포스터 세션

DS12 김호, 정재원 “액적 진동의 증폭을 이용한 전기수력학 분사,” 2012년 대한기계학회 추계학술대회, 2012년 11월 7~9일, CECO, 창원, 포스터 세션

DS11김호, 이승미, 정재원 “홀 타입 전극을 이용한 전기 수력학 프린팅 기술 개발,” 2012년 대한기계학회 열공학부문 춘계학술대회, 2012년 5월 23~25일, 용평리조트 그린피아콘도, 포스터 세션

DS10 이승미, 송준영, 정재원 “사각펄스를 이용한 요구적출형 전기수력학 인쇄,” 2011년 대한기계학회 추계학술대회, 마이크로/나노 공학 부문, 대구 엑스코, 포스터 세션, 2011년 11월 4일

DS9. 양중근, 정재원, “Optoelectrowetting 기기 구현을 위한 임피던스 해석,” 2010년도 대한기계학회 열공학부문 춘계학술대회, 2010년 5월 13일~14일, 전북대학교, 전라도, 2010년 대한기계학회 열공학부문 춘계학술대회 논문집, pp. 388-389

DC8. 송준영, 이승미, 정재원, “평판, 홀, 핀 전극에서의 전기수력학분사 토출 전압의 예측” 대한기계학회 2010 춘계학술대회, 2010년 5월 6일~7일, 한국기계연구원, 대전, 2010년도 대한기계학회 마이크로/나노공학 부문 춘계학술대회 논문집, pp 93~94

DC7. 정재원, “고해상도 하이브리드 프린팅,” 2008 Printed Electronics Korea, 세션 1, 장비 및 공정, 초청강연 및 좌장,  2008년 12월 12일, 한국기계연구원, 대전, Presentation only

DC6. 김효준, 정종렬, 양중근, 정재원, “전기수력학 프린팅의 분사 특성 변화에 대한 실험적연구,” 대한기계학회 2008년 추계학술대회, 2008년 11월 5일~7일, 용평리조트, 강원도, 대한기계학회 2008년도 추계학술대회 논문집, pp 1913-1916

DC5. 정재원, “직접쓰기 프린팅 기술과 플렉서블 일렉트로닉스,” 대한기계학회 2008년 추계학술대회, 유망과학자 세션, 2008년 11월 5일~7일, 용평리조트, 강원도, Presentation only

DC4. 한세운, 임태웅, 정재원, “금속 나노입자 잉크젯 프린팅과 레이저 패터닝,” 2006 한국정밀공학회 2006년도 추계학술대회, 2006년10월20일~22일, 제주, 한국정밀공학회 2006 년도 추계학술대회논문집, pp. 429-430

DC3. 임태웅, 한세운, 정재원, “잉크젯 프린팅 피코 리터 액적의 증발현상에 관한 연구,” 대한기계학회 2006년 춘계학술대회, 5월 17일~19일, 제주도, 대한기계학회 2006년도 춘계학술대회 논문집, pp. 2262-2268

DC2. 한세운, 임태웅, 정재원, 김동조, 문주호, “은 나노입자 박막의 소결 및 나노 초 레이저에 의한 어블레이션 특성,” 대한기계학회 2006년 춘계학술대회, 5월 17일~19일, 제주도, 대한기계학회 2006년도 춘계학술대회 논문집, pp. 2120-2126

DC1. 정재원, “레이저 하이브리드 나노잉크 프린팅과 플렉서블 일렉트로닉스,” 대한기계학회 창립 60주년 기념 춘계학술대회, 2005년 5월 25일-27일, 부산, 대한기계학회 2005년도 춘계학술대회 논문집, 2348-2352

국내논문

3. C. Jeon, J. Chung, J. Lee, S, Kang, 1999, “Study on the characteristics of pressure drop in multichannel in an automotive condenser,” Journal of Korean Mechanical Engineering, B, Vol. 23, No. 7, pp. 881-892.

2. C. Jeon, J. Chung, J. Lee, 1999, “Study on the characteristics of condensing heat transfer in automotive multichannel,” Journal of Korean Mechanical Engineering, B, Vol. 23, No. 4, pp. 479-491.

1. C. Jeon, J. Chung, J. Lee, 1999, “Study on the characteristics of heat transfer and pressure drop in flat multichannel tube,” Journal of Air Conditioning and Refrigeration, Vol. 9, No. 3, pp. 376-388.

bottom of page